JBL AC15 2-way Speaker

JBL AC15 Speaker – Ultra Compact 2-way Loudspeaker with 1 x 5.25” LF

Including wall bracket

The AC15 is an ultra-compact fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and yet be visually unobtrusive. The enclosure design allows for installation very close to walls and ceilings making it an ideal choice for under balcony, column, or wall mounting.
The high frequency device is a 1” dome tweeter integrated into a newly designed 90° x 90° waveguide providing even coverage throughout the intended usage area. The combination exhibits
smooth power response resulting in extremely natural voicing. The AC15 utilizes a 5.25” Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 1.5” voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The rugged multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane.
The rugged plywood enclosure features JBL’s textured DuraFlex™ finish and is equipped with a heavy duty powder coated steel, foam-backed grille.

Features

1” Dome Tweeter with 90° x 90° Coverage.
135 mm (5.25 in) LF transducer
Ultra compact enclosure
300W Program Power
Dual Neutrik NL4 connectors plus screw terminal
FIR Tuning Set Delivers Optimized Frequency & Phase Response, Coverage Consistency, and Sound Quality

Specifications

System:

Frequency Range (-10 dB): 80 Hz – 20 kHz
Frequency Response (+/-3 dB): 90 Hz – 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7 (avg. 500 Hz – 16 kHz)
Directivity Index (DI): 8 dB (avg. 500 Hz – 16 kHz)
System Sensitivity: 86 dB SPL/1W/1m
Rated Maximum SPL (1m): 108 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating (Continuous/Program/Peak): 150 W / 300 W / 600 W
AES Standard Power Rating: 225 W
Crossover Frequency: 3.3 kHz

Transducers:

Low Frequency Driver: 1 x JBL 225J, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in) edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25 mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°

Physical:

Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachments: 4 x M8 points; 1 top, 1 bottom, 2 rear. 2 x M6 bottom for OmniMount® 20.5 or MultiMount® MM-008-BT
Grille: Powder coated 18 gauge perforated steel, acoustically transparent foam backing
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade lugs.
NL4’s +1/-1 in parallel with barrier strip (+2/-2 loop through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529.